IPv6 configuration via SLAAC is not possible for our dedicated servers. For each dedicated server, we provide a /64 IPv6
To ensure the quality of service of our network, we have made changes that require you to also make changes
To ensure the quality of service of our network, we have made changes that require you to also make changes
For customer address space announced via our AS24961 it is possible to have RDNS functionality within the customer panel. We
In principle, up to 31 additional IPv4 addresses per server - for vServers the maximum possible number is 7 IPs
Before you follow this FAQ article, please read our FAQ article abouthow to get an BGP session. This is supported
Yes, this is possible for our Co-Location customers. We will provideyou with a full-table BGP session through our three multi-hop
Internal traffic is not billed on the data volume. If the bandwidth is reduced due to exceeding the data volume,
unfortunately not all IP's can be transferred from all servers:vServer <-> Dedicated server - Not possiblevServer <-> Root-Server - Not
if you get a (small) DDoS attack, you can already block it using iptables (Linux) or the Windows firewall.
If this
For IPv4 we support routing on /32 granularity among all dedicated server and all root server products within the same
The following strict requirements need to be fulfilled prior to the announcement via our AS24961:
We strictly require an exact matching
You will find the correct network configuration in the ZKM, with your respective contract:Configuration examples*** Important ***For the sake of
If you have issues with the network speed (Download/Upload) of your server, please perform the following while the server is
If network issues occur, for example high latency, less bandwidth or packet loss an analysis is necessary. You must check
For Windows:
To see the current network connection of your server, you must display the adapter settings of your network adapter
Short interruptions in online games or radio streams are not always due to network problems. These dropouts are often caused
When a virtual machine is created on the host system, the network configuration of the VM is always as follows:
IP:
To set up Ipv6 on your server, you need the IPv6 information from your ZKM:
Attention: Please use only the IPv6
The use of failover IP requires that you keep your data synchronous between both servers. There are basically different procedures